| Customization: | Available |
|---|---|
| After-sales Service: | Manufacturers Provide Remote Instruction |
| Warranty: | 1 Year |
Suppliers with verified business licenses
| Product model | RLQ5125GXEE6 | Dimensions | 6900×2300,2350×2850mm |
| Total mass | 11995kg | Chassis type | EQ1125SJ8CDC |
| Rated load | 6200,6265kg | Curb weight | 5600kg |
| Cab number | 2 | Front/rear overhang | 1130/1970,1180/1920,1317/1783mm |
| Approach/departure Angle | 21/15 | Axle load | 4350/7645kg |
| Maximum speed | 103km/h | Wheelbase | 3800,3950,4050,4100,4400,3600,4700mm |
| Chassis brand | Dongfeng Brand | Engine Model | CY4BK461 CA4DB1-11E6 CY4BK161 D20TCIF1 Q28-130E60 H20-120E60 CA4DB1-13E6 YCY24140-60 |
| Number of axles | 2 | Number of tires | 6 |
| Tyre size | 245/70R19.5,8.25R20,245/70R19.5 16PR,8.25R20 16PR,8.25R20 14PR,255/70R22.5 16PR | Front gauge | 1745,1802,1820,1842,1765,1890mm |
| Track rear | 1630,1650,1800,1720mm | Number of leaf spring pieces | 8/10+7,12/12+9 |
| Type of fuel | Diesel | Total tank capacity | 8.13cubic meters |
Additional Information
Chassis configuration:
Yun Nei 150 hp engine Wanliyang 6-speed transmission, 3800 wheelbase, 825 steel wire tires, with hydraulic power, clutch power, original air conditioning, air brake, ABS, electric glass, remote control key and other special features.
Upper configuration:
6mm WISCO high-quality carbon steel plate, standard Shandong SK-6 water circulation pump (or 8 tons of oil pump with oil-water separator), 8 meters of a suction pipe, anti-overflow valve with a view of the sewage pipe, within the 2 anti-wave plate support, 360-degree rotating boom with the boom seat, 220 of the pneumatic valve switch, a 8-meter suction pipe (liquid level alarm).
Optional configuration:
Mechanical Seal Pump Make-up Price.
Function Introduction
Suction septic truck, mainly should be to septic tanks, sewage ditches and sewers and other environmental cleanup clean-up work of special vehicles. Mainly automobile chassis, tanks, suction device and other components. Mainly for the urban and rural departments to pump and transport feces and other sewage. Suitable for pumping feces, sewage, sludge slurry and liquids mixed with small suspended debris, suitable for municipal, small, medium and large industrial and mining enterprises, neighborhoods, schools, septic tanks cleanup and transfer, urban pipeline cleanup and dredging, factory methane sludge cleanup and so on. In order to clean up more feces, the hose should be inserted as deep as possible into the dirty liquid, to ensure that the end of the pipe in the operation process is always from the liquid surface of three hundred mm below.
Push the four-way valve handle to be perpendicular to the ground. Put the transmission into neutral, then start the engine, disengage the clutch, and pull the extractor switch backward, i.e., gear pickup, and the vacuum pump starts to run. Put the transmission into neutral, then start the engine, disengage the clutch, pull the extractor switch backward that is, put it into gear and take the power, and the vacuum pump starts to run. Open the toolbox in the cab, pull out the rattle switch and turn on its power. The operator can know the situation of liquid level height through the observation mirror at the top of the rear seal head, when the liquid level height reaches the middle of the observation mirror, it is necessary to notify the driver at this time, and quickly pull the suction hose off the ground or close the four-way valve. Generally, after the above situation, the audible and visual signals will be issued by the audible and visual signals, at this time the driver receives the signals should reduce the throttle, push the pickup switch forward to dismantle the off-loading gear, the vacuum pump stops rotating and presses the audible and visual switches, and at the same time cuts off the power supply.
Close the refueling tank by placing the filler tank through-plug knob plate parallel to the inlet box axis. After washing the hose, return it to the walk-around box, close the side door and keep the boom facing over the cab. After washing the hose, return it to the walk box, close the side door, and keep the boom facing over the cab. Close the anti-spill valve just enough to keep its handle perpendicular to the road axis. Drive away from the job site.
The function is to drive the vacuum pump to rotate at high speed by the engine power through the transmission shaft. When the engine starts, the air pressure reaches five to six atmospheric pressure, the left foot on the clutch, will be a single gear switch open, at the same time will be the alarm single switch open, so that the extractor drive vacuum pump normal work.
Transmission shaft: it is an important part of the transmission system to transfer power in the septic tanker, its role is to transfer the engine power to the wheels together with the transmission and drive axle, so that the septic tanker generates driving force.
Multi-way directional valve: It is a combination of more than two valve blocks to manipulate the movement of multiple actuators. It can be based on different hydraulic system requirements, the safety valve, overload valve, make-up valve, shunt valve, brake valve, check valve, etc. together, so it is compact, simple piping, pressure loss is small, and easy to install, so in the suction of manure trucks and other requirements to manipulate the movement of multiple actuators in the walking machinery is widely used.
Suction septic tanker see septic tube: according to the customer's demand, add a see septic tube on the tank. This tube is transparent, although there is no number on it, but its role is not trivial, see manure tube is inserted in the tank with a socket above, because the tank and see manure tube connected, so, see the manure tube of the water to reach the position is the location of the tank body fecal water. The main role is to increase the sealing performance of the tank. Water-air separator: a dehumidifying device that separates free water in the air stream by using mechanical or increased kinetic energy. Vacuum meter: the air flow meter is a device to measure the amount of air inhaled by the engine of the suction truck, and it adopts transparent design to help users understand the working condition of the vacuum pump. One-way valve: its role is in the engine off, the vacuum pump stops working, to prevent the gas backflow, the vacuum pump lubricating oil sucked into the tank body caused by waste.
Oil-gas separator: Its function is to separate the lubricant and gas mixture discharged from the vacuum pump, the gas is discharged into the atmosphere, and the lubricant flows back to the vacuum pump to continue to act, and the cycle is repeated. At the same time, the piece is also used as a lubricating oil barrel role.
Vacuum pump of septic tanker: according to the different volume of the tank, it can be equipped with single or double pumps, and it adopts low-speed pump made of silicon steel centrifugal casting, with 500 to 600 revolutions per minute, and the thickness of the blade is up to 30mm, and it is a kind of high-efficiency sewage suction pump with high efficiency, and the efficacy and service life of the pump is several times higher than that of the common sewage suction pump, and it has the features of high vacuum degree, long service life and stable quality.
Large four-way valve: it is a control valve with four oil ports. Four-way valve is an indispensable part of the refrigeration equipment, its working principle is, when the solenoid valve coil is in the power-off state, the pilot slide valve in the right side of the compression spring drive left, high-pressure gas into the capillary tube into the right end of the piston cavity, on the other hand, the left end of the piston cavity of the gas discharged, due to the existence of the piston at the two ends of the pressure difference between the piston and the main slide valve to the left, so that the exhaust pipe and the outdoor machine receiver connected to the other two receivers connected to the Formation of refrigeration cycle.
Safety instructions
1. Please read the "Operating Precautions" (labeled on the control box) carefully before operating the septic tanker!
2. Please pay attention to observation to ensure the safety of personnel and vehicles!
3. Operators try to maneuver in the car or outside the operating radius!
4. Manual operation of the handle is only a backup emergency, to the remote control to ensure safety and convenience;
5. Before using the suction manure truck without skill, please keep the low speed and run evenly and ask someone to observe and cooperate until you can use it independently and skillfully!
6. Remember to close the extractor during transportation!
7. Please turn off the remote control when the vehicle is being transported!
8. Do not transport the process of rapid opening and stopping or high-speed sharp turn!
Maintenance
The garbage truck should be maintained in strict accordance with the regulations, so that the systems and devices are often in good technical condition, giving full play to their effectiveness, reducing fuel consumption, saving money and maximizing the service life of the garbage truck.
(1) Chassis maintenance
The chassis should strictly abide by the provisions of its instruction manual and carry out daily and weekly routine maintenance.
(2) Maintenance of operating devices
The maintenance of the operating equipment is generally carried out in accordance with the following provisions. If you can ensure that the operating device is in good working condition, its maintenance is allowed to be synchronized with the chassis maintenance.
1. Daily maintenance
Daily maintenance mainly focuses on cleaning and observation, and the contents are the same as the precautions in the use of garbage trucks in Article 3.
2.100h maintenance
The 100h maintenance focuses on fastening and lubrication.
(1) Check and tighten the connecting bolts of the vehicle, working device, shaft and other parts.
(2) Add grease or lubricant to each lubrication point on time.
(3) Check and fasten the connecting bolts, joints, hose clamps and pipe clamps of the hydraulic system, and check whether there is any oil leakage.
(4) Check whether the extractor works normally.
3. Operational 500h maintenance
Operation 500h maintenance focuses on adjustment.
(1) Whether there is a slight deformation of the parts in each operating device, and correct it if necessary.
(2) Check the wear and tear of the sealing tape and replace it if necessary.
(3) Check whether the hydraulic components can work normally, if necessary, should be dismantled or replaced. If there is oil leakage, the seals should be replaced.
4.Operation 1500h maintenance
Operation 1500h maintenance focuses on comprehensive technical inspection and adjustment of each operating device to eliminate hidden dangers.
(1) Check and repair all welds, especially the welds of each important part.
(2) Check the wear and operation of each device parts, wear and operation of the serious should be replaced.
(3) Check the hydraulic components.
(4) Clean the hydraulic oil tank, each oil filter, air filter and hydraulic pipeline, replace the hydraulic oil. Damaged seals and hoses should be replaced in a timely manner.
With finished vehicle display area, fully functional manufacturing workshop, spraying electrophoresis workshop and testing center, high-end sophisticated production equipment, mature manufacturing process and excellent technical team, modern enterprise management mechanism, is a collection of automotive technology research and development, automobile manufacturing modification, parts production, sales in one of the diversified automotive companies.
1. Q: Are you a factory or a trading company?
A: We are a leading manufacturer of emergency rescue vehicles, special box vehicles and sanitation vehicles. Welcome to Suizhou City, China's special automobile production base.
2. Q: Where is your factory located?
A: We are located in Suizhou City, Hubei Province, China
3. Q: How do I get there?
A: Welcome to the factory for inspection. You can fly to Wuhan Tianhe Airport, our company will arrange a special car to pick you up.
4. Can you make it exactly according to my requirements?
Yes. We have a professional research and development team that can produce products according to your needs.
5. Q: Do you provide the certification we need?
A: We can provide all kinds of certificates. Such as IOS, 3C and so on.
6. What are your terms of payment?
A: Telegraphic transfer is preferable.
7. Q: Do you arrange the shipment of vehicles?
A: Yes, we can arrange shipment according to the terms of trade.
8. Q: How can you help me?
A: We offer a tracking service and a one-year free warranty on all products. At the same time we provide free training and technical support to guide you to repair your products. If required, we will also air the original spare parts.
9. Q: What about the packing?
A: All the packing is up to export standard.
10. Q: How long is the delivery time?
A: According to the arrangement of the workshop, the order is usually 15 to 20 working days.
For other questions, we will get back to you as soon as possible after receiving your inquiry!
){kind=link}