Product Description
Isuzu 4-ton foam fire truck
Dimensions: Length 6990X width 2200X height 3100, front overhang 1110, rear overhang 2065.
The whole vehicle is made of QL1110ANKAY type II special chassis produced by Qingling Automobile Co., LTD. It is equipped with sandwich full power force extracter to drive the rear fire pump. The engine has the characteristics of large reserve power, good dynamic performance, reasonable structure, beautiful shape, etc. It can be widely used in various professional fire brigades, oil terminals, factories, mines and other places to quickly fight oil fires or general solid organic matter fires. The carriage has an integral structure. The frame of the carriage is welded with rectangular tube profiles, and the inner coating plate is an oxidized aluminum alloy plate. The bonding process is adopted, and the seam is sealed to prevent electrochemical corrosion. The water-carrying liquid tank is made of high quality carbon steel and treated with anti-corrosion. The tank body is provided with a vertical and horizontal anti-swing plate, the bottom is provided with a longitudinal joist, the top of the tank is provided with a human hole, which can maximize the service life of the tank body under the premise of ensuring convenient maintenance. The foam carrying tank is made of high-quality stainless steel, the tank is provided with anti-swing plate, and the tank top is provided with population holes to ensure convenient maintenance
Under the premise of maximizing the service life of the tank. The vehicle is equipped with the CB10/40-RS fire pump developed and produced by Rongshen and the West PL8/32 vehicle fire cannon, with mature technology and stable performance, and is widely used in fire trucks. The fire performance of the vehicle meets the requirements of GB7956.1-2014 and GB7956.3-2014 standards, and has passed the inspection of the National Fire Equipment Quality Supervision and Inspection Center. The chassis has passed the inspection of the National Quality Supervision and Inspection Center and obtained the Chinese national mandatory product certification, and the engine emissions meet the requirements of the sixth stage of GB17691-2018 emission standards.
Product Parameters
I, The bottom plate
Model: Qingling Automobile Co., LTD/QL1110ANKAY Engine: Qingling Isuzu (Chongqing) Engine Co., LTD
Model: 4HK1-TCG60
Power: 151kW
Drive type: rear wheel drive
Axis pitch: 3815mm
II, The cab
Structure: flat head, double row seat four-door occupant room, all steel frame welded structure. Seating: 3 people in the front row 3 people in the back row.
Cab structure: installation of hydraulic rollover mechanism suitable for tipping, equipped with anti-fall safety device.
Equipment in the cab: in addition to the original equipment, install the control switch of the force extractor, 100W alarm, alarm light switch, etc.
Outside the cab: a long row of alarm lights is installed near the front of the cab.
III, The tank
Capacity: Water: 2860Kg, foam: 900kg
Material: Water tank: high quality steel plate, high-tech anti-corrosion treatment;
Foam tank: SUS304 stainless steel.
Structure: The frame is welded, and the tank body is provided with longitudinal and transverse anti-swing plates to reduce the impact of the water in the tank on the tank body during the driving of the vehicle; The front and rear wall panels of the tank are folded with trapezoidal rib, so that the tank has sufficient strength.
The top of the tank is equipped with a quick opening entry hole, which is convenient for maintenance personnel to enter and exit. The tank is provided with a device and a filter screen to prevent the water pump from absorbing water and forming a vortex, thereby affecting the flow rate.
The tank is provided with a stainless steel float type liquid level indicator, which can display the capacity of fire extinguishing agent in the tank through the liquid level gauge on the instrument panel; A sewage outlet with ball valve is provided at the bottom of the tank.
The water tank body is provided with a 76mm overflow pipe and a 65mm injection port on each side of the carriage, which is convenient for other vehicles to supply water and add liquid.
The foam tank body is provided with a 60mm overflow pipe by adding foam fire extinguishing agent through the top tank opening. Equipment: 2 entry holes with quick locking and opening device.
1 level indicator, 1 foam indicator
2 sewage outlets with stainless steel ball valve.
2 water injection ports (one on each side)
Process: solid and reliable welding, removing and cleaning slag, welding and other defects; After welding, the tank should be tested for 24 hours to ensure that there is no leakage.
IV. Fire pump and piping system
Fire pump: CB10/40 Low pressure fire pump flow: 40L/s
Pressure: 1.0MPa Installation type: rear
Vacuum pump: piston type;
Vacuum pump material: wear resistance, corrosion resistance to meet the sealing requirements; Suction time ≤35s, suction depth ≥7m.
Maximum vacuum degree: ≥85kPa;
Piping system
Tank piping part:
Water suction pipe: the pump is provided with a Φ125mm water inlet, which can absorb water from natural water source, liquid tank and fire reservoir, and can be connected to the fire hydrant with a conversion reducing interface. The water suction pipe is placed on the roof of the car. 1 water inlet with Φ125mm butterfly valve for connection to water tank.
Outlet pipe:
The roof of the car is provided with a Φ80mm water fire cannon pipeline and control valve, using flexible joints; Each side of the pump room is provided with a Φ80mm manual ball valve controlled water outlet.
Water injection pipeline: a Φ65mm water pump is set in the pump room to fill the water injection pipeline and control valve in the tank;
There is a Φ65mm water injection pipe on the left and right sides of the carriage, which can inject water into the tank, and the interface is an internal button interface.
Discharge pipe: In order to protect the water pump and the ball valve, the discharge pipe is installed in the pipe, and respectively
Equipped with ball valve. Foam tank piping part:
Feed line: Foam is fed into the top tank cover, or directly external foam can be controlled through the pump room valve. Discharge pipe: there is a Φ40mm stainless steel discharge pipe with manual ball valve control.
Discharge water pipe: In order to protect the water pump and the ball valve, the discharge water pipe is installed in the pipeline, and the ball valve is equipped.
V, Fire cannon
Type number: PL8/32 Fire gun flow: 32 (L/s)
Range: Water ≥50m Pressure: 1.0MPa
Location: Located at the top of the water tank.
Control: Manual control, with locking mechanism, easy to operate.
VI, The force extractor
Type: Full power sandwich force extractor
Cooling method: forced water cooling
Lubrication method: splash lubrication
Operation mode: In the driver's room, the force extractor is operated on the instrument panel. The force extractor is convenient and stable with no noise. Installation: The force extractor is well matched with the engine, accurate installation, no self-falling phenomenon after combination.
VII. Equipment box and pump room
Main material:
Skeleton, skin are high quality carbon steel; The internal equipment frame is made of aluminum alloy profiles, and the interior plate is oxidized aluminum plate.
Basic structure:
1, for the overall structure, the front for the equipment box, the rear for the pump room.
2, the rear is the pump room, equipped with instrument panel and operating system, equipment box and pump room are equipped with a locking shutter door. Frame welded structure and ensure its strength and stiffness.
3. The space can be adjusted arbitrarily, and the equipment box is equipped with a drainage hole.
4, the equipment box is reliable, beautiful, large space curtain door equipment box, to ensure the full use of space.
5, the carriage and pump room are equipped with lighting to meet the lighting needs of night fire fighting.
Aluminum alloy rolling shutter door:
1, all the equipment compartment and pump room are using a locking shutter door, the handle and lock pin are durable, no deformation, the sealing performance is tested by water shower to ensure no leakage.
2. There are rivets in the slide rails on both sides of the rolling shutter door to avoid falling off.
3. There are lights in each equipment compartment, which are controlled by the opening and closing of the rolling shutter door.
4, two aluminum alloy curtain doors on the left and right, one at the back, safe, reliable, beautiful and practical.
Basic principles:
(1) Integration of design equipment according to combat organization and combat deployment;
(2) Design various equipment brackets according to ergonomic principles;
(3) Without any climbing tools, take any equipment in the box simple and practical principle.
(4) Place the equipment according to the logical relationship and frequency of use;
(5) Stand on the ground or pedal within 1-2 movements to access any equipment.
VIII, Electrical system
1. The top of the cab is equipped with red long rows of luxury alarm lights.
2, alarm power is 100W;
3, in order to ensure the safety of use, the whole vehicle line is made of wiring harness, and the connection is made of waterproof plug to ensure the safety of the line during use.
4. The roof of the car is equipped with 1 fire lamp; Safety sign lights are provided below both sides of the vehicle, and reflective signs are affixed to the body and tail according to the standard.
5. All equipment boxes are equipped with LED lights to facilitate the use of night combat lighting.
6, both sides of the vehicle are equipped with two flash lights, two lights, the rear is equipped with searchlights, safety sign lights and side recovery reflectors installed below (combined), equipped with front and rear profile lights, one turn light on each side, the crew room, equipment box, pump room are equipped with lights.
7, alarm, alarm light, strobe light, circuit for independent additional circuit, control device installed in the cab.
8, all lines are protected by sleeve, and use different colors to distinguish line connection forms.
9. Equipment on the instrument panel in the pump room: liquid level meter, tachometer, pressure gauge, vacuum meter, equipment box lighting
Switches, etc.
IX. Instrument panel and equipment on board
1. The instrument panel is located in the pump room at the rear of the vehicle, with a control panel and adequate lighting;
2. There are Chinese signs near all control handles, switches and indicators;
3. There are instructions for operating procedures.
4, all signs have durability and high adhesion, can withstand the impact of the drastic changes in temperature and climate.
5, the operation panel adopts transparent acrylic, aluminum profile frame, beautiful, safe and firm.
6, the pump room operating system is set in the rear of the vehicle, no pressure outlet, to ensure the safety of the operator, with panel lighting.
X. Overall technical requirements
1, the vehicle performance in line with GB7956 "fire engine performance requirements and test methods" provisions.
2, the appearance of the vehicle to maintain a certain degree of flatness, and in line with relevant regulations.
3, all riveting to maintain a certain density, in line with the provisions of enterprise standards.
4, all welding firm, smooth, smooth, in line with the requirements of enterprise standards.
5, all operating switches, instruments, equipment racks and vehicles are in line with the standard nameplate marks.
XI. Documents accompanying the car
1) Chassis instruction manual 2) Chassis quality warranty card
3) Chassis maintenance manual 4) Chassis qualification certificate
5) Vehicle tools Listing 6) Engine number rubbing
7) Chassis number rubbing 8) fire engine operating instructions
9) Fire truck Fire equipment list 10) Fire truck certificate
11) Fire Truck Tracking Service Card 12) Fire Exchange list
Equipment list
| category |
Item |
Water tank fire truck |
Qty |
remark
|
| Device name |
|
Onboard technical documentation
|
1 |
Fire engine instruction manual |
1 |
|
| 2 |
Fire engine equipment configuration table |
1 |
|
| 3 |
Car chassis instruction manual |
1 |
|
| 4 |
Automobile chassis certificate |
1 |
|
| 5 |
Vehicle accessories (tools) |
1 |
Original chassis accessories and tools |
|
Fire extinguishing equipment
|
1 |
Fire suction pipe |
4 |
2000mm×4 |
| 2 |
Water filter |
1 |
|
| 3 |
Water distributor |
1 |
|
| 4 |
Water collector |
1 |
|
| 5 |
∈65×20m water belt |
2 |
Atmospheric pressure |
| 6 |
∈80×20m water belt |
2 |
Atmospheric pressure |
| 7 |
Reducing joint |
2 |
|
| 8 |
Homogeneous interface |
1 |
|
| 9 |
Fire axe |
1 |
|
| 10 |
Hose wrap |
4 |
|
| 11 |
Apron bridge |
1 |
|
| 12 |
Hose hook |
4 |
|
| 13 |
Ground hydrant wrench |
1 |
|
| 14 |
Underground hydrant wrench |
1 |
|
| 15 |
Suction wrench |
2 |
|
| 16 |
Fire nozzle |
2 |
Dc switch blooms one each |
| 17 |
Fire bucket |
1 |
|
|
Break the life saver
|
1 |
extinguisher |
1 |
|
| 2 |
Shovel |
1 |
|
| 3 |
Fire axe |
1 |
|
| 4 |
T-pick |
1 |
|
| 5 |
Iron collar |
1 |
|
Company Profile
The strength of the company
With finished vehicle display area, fully functional manufacturing workshop, spraying electrophoresis workshop and testing center, high-end sophisticated production equipment, mature manufacturing process and excellent technical team, modern enterprise management mechanism, is a collection of automotive technology research and development, automobile manufacturing modification, parts production, sales in one of the diversified automotive companies.
Manufacturing Strength
Certifications
Buyer group photos
FAQ
1. Q: Are you a factory or a trading company?
A: We are a leading manufacturer of emergency rescue vehicles, special box vehicles and sanitation vehicles. Welcome to Suizhou City, China's special automobile production base.
2. Q: Where is your factory located?
A: We are located in Suizhou City, Hubei Province, China
3. Q: How do I get there?
A: Welcome to the factory for inspection. You can fly to Wuhan Tianhe Airport, our company will arrange a special car to pick you up.
4. Can you make it exactly according to my requirements?
Yes. We have a professional research and development team that can produce products according to your needs.
5. Q: Do you provide the certification we need?
A: We can provide all kinds of certificates. Such as ISO, 3C and so on.
6. What are your terms of payment?
A: Telegraphic transfer is preferable.
7. Q: Do you arrange the shipment of vehicles?
A: Yes, we can arrange shipment according to the terms of trade.
8. Q: How can you help me?
A: We offer a tracking service and a one-year free warranty on all products. At the same time we provide free training and technical support to guide you to repair your products. If required, we will also air the original spare parts.
9. Q: What about the packing?
A: All the packing is up to export standard.
10. Q: How long is the delivery time?
A: According to the arrangement of the workshop, the order is usually 15 to 20 working days.
11. Q: How is the quality of your factory's trucks?
A: Our truck has obtained ISO9001:2008 and relevant certificates such as CCC, B&V, GCC, OTTC, ADR, etc. The chassis and accessories are all from the original factory and are labeled with anti-counterfeiting labels.
For other questions, we will get back to you as soon as possible after receiving your inquiry!
){kind=link}