| Customization: | Available |
|---|---|
| Operating Mode: | Electric/Manual/Remote Control |
| Driving: | LHD or Rhd |
Suppliers with verified business licenses
| Item | Parameter | Remarks |
| Vehicle Model | KLF5070GQWZ6 | |
| Wheelbase (mm) | 3280 | |
| Engine Model | Weichai 160 hp | National VI emission, diesel engine |
| Engine power (kW) | 118 | |
| Overall dimensions [L×W×H (mm) | 5975,5990×2200,2250×2670,2750 | |
| Overall mass (kg) | 5435 | |
| Maximum total mass (kg) | 7360 | |
| Effective volume of box (m3) | Approx.2 m3 of water/4 m3 of sewage | |
| Upper Configuration | Appearance size in accordance with the announcement production, water tanks on both sides, fresh water volume of about 2 square, sewage volume of about 4 square, dirt tank 5mm, water tank 4mm, are made of high-quality carbon steel. Cleaning part: 170L/min high-pressure pump, water inlet with filter, 60 meters of 19# high-pressure pipe, a set of 1-10 nozzles, reel mounted on the back head. Suction part: SK-9 water circulation pump, 8 meters suction pipe. Details: the tank can be lifted, the rear door can be opened hydraulically and locked manually, the rear head has one 100 ball valve and one 150 ball valve, and the rest are standard. |
|
The whole tank and metal accessories are sprayed with polymer anticorrosive primer and metal topcoat, which has strong adhesion, good corrosion resistance, even paint film, bright and long-lasting color, improving the degree of aesthetics, able to withstand humid, dusty, salt spray and other adverse environments, and will not crack, peel, fade, etc., for long-term use, which not only improves the product's degree of aesthetics, but also effectively prevents rust and corrosion.
Suction section:
Function
The special part of the suction truck consists of extractor, transmission shaft, vacuum suction pump, pressure tank, hydraulic part, pipe network system, vacuum pressure gauge, sight manure window, hand-washing device, etc. The truck is equipped with high-power vacuum suction pump and high-quality hydraulic system, and the head of the tank is molded by one-time die-casting, and the tank can be opened at the back, and the double top can be discharged. The dirt in the tank can be dumped directly through the back cover, which has the features of high vacuum (greater suction power than the suction manure truck), large tonnage, high efficiency and wider use.
Working Principle
Vehicle start, hook up the extractor, drive the suction pump, suction pump operation to extract the air in the dirt tank, due to the suction hose is always submerged in the liquid surface, the air in the dirt tank is pumped, because it can not be replenished and more and more thin, resulting in the pressure in the tank is lower than the atmospheric pressure, the dirt that is used in the atmospheric pressure, through the suction hose into the tank.
High-pressure cleaning part:
Function
The powerful pressure generated by high-pressure water flow washes away the blocked pipes. The main components of the tank, high-pressure pump, hydraulic system, etc.. High-pressure cleaning truck is mainly used for cleaning urban sewers, pipelines, sediment, dead end mud ditch dredging, but also can be used to clean industrial drainage pipeline, wall, etc., cleaning highway, square ground.
Working principle
Vehicle start, hook up the sandwich extractor, drive the high-pressure pump, through, the high-pressure pump will transfer the clean water to the high-pressure pipe, and then by the adaptable high-pressure pipe of the gun head, the formation of high-pressure water flow. The speed of this high-pressure water flow has a huge striking energy, can accomplish different kinds of tasks. This highly concentrated high-pressure water flow is used to complete a variety of pipeline unblocking, dredging operations called "high-pressure pipeline unblocking" technology.
Precautions
1. Maintain the oil pump vacuum pump appropriate speed; vacuum pump speed is too high, the rotor heating intensified; speed is too low, it will cause additional impact on the shipping machine, components, affecting the life. In order to achieve the appropriate working speed, please adjust the best position of hand throttle according to the pump type in advance.
2. tipping the tank on a flat surface; tipping the tank on an inclined surface will distort and deform the components and cause failure, and may result in an overturn accident.
3. open the locking device first when lifting the tank, then open the back cover of the tank, and finally lift the tank, discharge as much sewage as possible before lifting the tank, and it is forbidden to lift the full tank.
4. When the oil pump and vacuum pump are taking power, the engine is idling and the clutch pedal is fully pressed in, and the clutch pedal is released slowly after the switch of the power take-off is opened.
5. The high pressure pump and oil pump are out of service when the vehicle is in motion.
6. The vehicle shall not be used to inhale materials larger than the diameter of the hose and to transport waste oil and hazardous materials.
7. When entering the bottom of the tank or overhauling the tank under the lifting condition of the tipper, the support bar and safety block must be used.
Hubei Kaili Special Vehicle Co., Ltd. is a wholly-owned subsidiary of Kaili Automobile Group, with CNC machining center, welding robot, fiber laser cutting machine, CNC plasma cutting machine and other advanced production equipment, is a high-end intelligent sanitation, emergency equipment special vehicle research and development production, system integration and operation services in one of the manufacturing enterprises.
Batch departure diagram
1. Q: Are you a factory or a trading company?
A: We are a leading manufacturer of emergency rescue vehicles, special box vehicles and sanitation vehicles. Welcome to Suizhou City, China's special automobile production base.
2. Q: Where is your factory located?
A: We are located in Suizhou City, Hubei Province, China
3. Q: How do I get there?
A: Welcome to the factory for inspection. You can fly to Wuhan Tianhe Airport, our company will arrange a special car to pick you up.
4. Can you make it exactly according to my requirements?
Yes. We have a professional research and development team that can produce products according to your needs.
5. Q: Do you provide the certification we need?
A: We can provide all kinds of certificates. Such as ISO, 3C and so on.
6. What are your terms of payment?
A: Telegraphic transfer is preferable.
7. Q: Do you arrange the shipment of vehicles?
A: Yes, we can arrange shipment according to the terms of trade.
8. Q: How can you help me?
A: We offer a tracking service and a one-year free warranty on all products. At the same time we provide free training and technical support to guide you to repair your products. If required, we will also air the original spare parts.
9. Q: What about the packing?
A: All the packing is up to export standard.
10. Q: How long is the delivery time?
A: According to the arrangement of the workshop, the order is usually 15 to 20 working days.
11. Q: How is the quality of your factory's trucks?
A: Our truck has obtained ISO9001:2008 and relevant certificates such as CCC, B&V, GCC, OTTC, ADR, etc. The chassis and accessories are all from the original factory and are labeled with anti-counterfeiting labels.
For other questions, we will get back to you as soon as possible after receiving your inquiry!
){kind=link}