| Customization: | Available |
|---|---|
| After-sales Service: | Provide Operating Manuals and Video Remote Assista |
| Warranty: | Within One Year |
Suppliers with verified business licenses
Ruili Xing RLQ5340GXFPM180/Z6 type foam fire truck
| Outline dimension | 10400×2530×3630(mm) |
| Maximum total mass | 33600kg |
| Liquid carrying capacity | Water load 13750L, foam liquid 4000L |
| Maximum speed | 95km/h |
| Rated flow of fire pump | 80L/[email protected]; |
| Rated flow of fire gun | 64L/s 1.0MPa; |
| Gun range | ≥65m |
| Approach Angle/departure Angle | 19°/9° |
| Model number | ZZ5357TXFV464MF5 |
| manufacturer | China Sinotruk Group Jinan Truck Co., Ltd. |
| Engine type | MC11.46-61 |
| Engine rating | 341kW |
| Engine displacement | 10518ml |
| Engine emission standard | GB17691-2018 National VI |
| Driving form | 6×4 |
| wheelbase | 4600+1400mm |
| Maximum allowable total weight | 35000kg |
| Minimum turning radius | ≤22m |
| gearbox | Manual operation |
| Power stripper | Full power sandwich extractor |
| structure | Crew head, four doors, original double row cab |
| Number of crew members | 2+4 people |
| Pilot position | Left set |
equipment |
Fire operation instrument panel and alarm light control box are installed at the instrument panel of the original vehicle 1. Alarm; 2. Power take-up control switch and indicator light; 3, additional power switch; |
structure |
The main frame structure is welded with high quality square pipe, and the exterior decorative plate is welded with carbon steel plate. The roof is non-slip and can be walked. |
Equipment case |
The equipment box is located at the rear of the crew room, with aluminum alloy rolling shutter doors on both sides and lighting inside. Storage boxes shall be provided in the equipment compartment as required. |
Pump room |
The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutter doors on both sides and behind, with lighting, and some commonly used equipment can be placed on both sides of the pump room |
| Heat preservation: installation of fuel heater (optional according to customer requirements) | |
| Climb the ladder and pull on the car | The rear ladder adopts aluminum alloy two-section turning ladder, which is not more than 450mm from the ground when used. The handle of the car is made of non-slip round steel tube with grooves on the surface, and the surface is sprayed with plastic. |
| capacity | 13750L |
| material | High quality carbon steel, thickness 4mm, high-tech anti-corrosion treatment inside the tank (optional 304 stainless steel) |
Tank setup |
Manhole: Set 2 DN500 manholes with quick locking/opening device |
| Overflow port: There are 2 overflow ports of DN125 | |
| Discharge port: Set 2 DN40 tank discharge port, equipped with ball valve | |
| Water injection port: Each group of DN65+DN80 interfaces is connected to the left and right sides of the pump house | |
| Inlet and outlet: set 1 water tank to pump inlet pipe, DN150 valve, electric control, set 1 water pump to water tank filling pipe, DN80 valve, manual control |
| capacity | 4000L |
| material | High quality 304 stainless steel, thickness 4mm |
Tank setup |
Manhole: Set 1 DN500 manhole with quick locking/opening device |
| Overflow port: One DN100 overflow port is set | |
| Spare water outlet: Set 1 DN40 tank spare water outlet with ball valve | |
| Water injection port: foam liquid is injected at the top, and the foam mixing valve is equipped with an external suction liquid tee interface, which can directly inhale the fire extinguishing liquid from the external foam source. | |
| Water outlet: Set a DN40 foam tank to the foam proportioner liquid outlet pipe, with ball valve, manual control. The foam tank can be cleaned by injecting liquid into the foam tank through a three-way pipe. |
| Model number | CB10/80 type atmospheric pressure vehicle fire pump | |
| form | Low pressure centrifugal type | |
| Rated flow | 80L/s @1.0MPa | |
| Outlet pressure rating | 1.0MPa | |
| Maximum suction | 7m | |
| pilot | Vacuum piston pump | |
| Pilot time | Maximum suction depth ≤75s |
| Pipe material | High quality seamless steel pipe |
| Suction line | A DN150 suction port with a closed cover is provided at the back of the pump room. |
| Water injection line | A set of DN65+DN80 water injection ports are set on the left and right sides of the water tank, and a DN80 water injection pipe with valve is set in the pump room |
| Outlet line | The left and right sides of the pump room are provided with 1 group of DN65+DN80 atmospheric water outlet with valve |
| Cooling water line | Cooling water line and control valve with cooling extractor |
| Model number | PL8/64 fire cannon | |
| Rated flow | 64L/S | |
| Rated pressure | 1.0 MPa | |
| elevation | ≥75° | |
| depression | ≤-35° | |
| Range (m) | ≥65 | |
| Horizontal turning Angle | ≥360° |
| Cab control | Pump off gear, alarm light alarm, lighting and signal device control |
| Pump room control | Install the main power switch, parameter display, status display |
| Additional electrical | Set up separate circuit |
Auxiliary lighting |
The firefighter room, the water pump room and the equipment box are equipped with lights, and the control instrument panel is equipped with lighting, indicators, etc |
| Strobe light | Red strobe lights are installed on both sides of the car |
Warning device |
Long rows of all red warning lights mounted on top of the cab |
| The alarm, whose control box is below the driver's front | |
| Fire lighting | Install a rear mounted 35W fire searchlight |
| topcoat | High quality domestic paint |
| colour | The main color of the exterior surface of the car is RO3 fire red |
| 1 | Design equipment integration according to combat organization and combat deployment. |
| 2 | All kinds of equipment brackets are designed according to ergonomic principles. |
| 3 | Do not need any climbing tools, take any equipment in the box simple and practical principles. |
| 4 | Place equipment according to the logical relationship and frequency of use |
| 5 | Stand on the ground or pedal to access any equipment within 1-2 movements |
Item |
name |
specification |
qty | remark |
| 1 | suction pipe | KDK 150×4 m | 2 | whorl of fingerprint |
| 2 | Water filter | FLF150 | 1 | whorl of fingerprint |
| 3 | Water distributor | FII80/65×2-1.6 | 1 | Inner buckle |
| 4 | Water collector | JII150/80×2-1.0 | 1 | Inner buckle |
| 5 | water belt | 13-65-20 | 10 | Inner buckle |
| 6 | water belt | 13-80-20 | 4 | Inner buckle |
| 7 | Irregular interface | 65/80 | 2 | Inner buckle |
| 8 | Hose wrap | DT-SB | 4 | |
| 9 | Hose hook | 4 | ||
| 10 | Ground hydrant wrench | QT-DS1; Length 400 | 1 | |
| 11 | Underground hydrant wrench | Length 860 | 1 | |
| 12 | Suction wrench | FS150 | 2 | |
| 13 | Dc switching water gun | QZG3.5/7.5;65 | 1 | Inner buckle |
| 14 | Dc spray gun | QZK3.5/7.5;65 | 1 | Inner buckle |
| 15 | extinguisher | 3 kg/ABC | 1 | |
| 16 | Fire axe | GFP890 | 1 | |
| 17 | Rubber mallet | 1 | ||
| 18 | Hose bridge | FH80 | 2 | |
| 19 | Fire bucket | 1 |
The strength of the company
With finished vehicle display area, fully functional manufacturing workshop, spraying electrophoresis workshop and testing center, high-end sophisticated production equipment, mature manufacturing process and excellent technical team, modern enterprise management mechanism, is a collection of automotive technology research and development, automobile manufacturing modification, parts production, sales in one of the diversified automotive companies.
1. Q: Are you a factory or a trading company?
A: We are a leading manufacturer of emergency rescue vehicles, special box vehicles and sanitation vehicles. Welcome to Suizhou City, China's special automobile production base.
2. Q: Where is your factory located?
A: We are located in Suizhou City, Hubei Province, China
3. Q: How do I get there?
A: Welcome to the factory for inspection. You can fly to Wuhan Tianhe Airport, our company will arrange a special car to pick you up.
4. Can you make it exactly according to my requirements?
Yes. We have a professional research and development team that can produce products according to your needs.
5. Q: Do you provide the certification we need?
A: We can provide all kinds of certificates. Such as ISO, 3C and so on.
6. What are your terms of payment?
A: Telegraphic transfer is preferable.
7. Q: Do you arrange the shipment of vehicles?
A: Yes, we can arrange shipment according to the terms of trade.
8. Q: How can you help me?
A: We offer a tracking service and a one-year free warranty on all products. At the same time we provide free training and technical support to guide you to repair your products. If required, we will also air the original spare parts.
9. Q: What about the packing?
A: All the packing is up to export standard.
10. Q: How long is the delivery time?
A: According to the arrangement of the workshop, the order is usually 15 to 20 working days.
11. Q: How is the quality of your factory's trucks?
A: Our truck has obtained ISO9001:2008 and relevant certificates such as CCC, B&V, GCC, OTTC, ADR, etc. The chassis and accessories are all from the original factory and are labeled with anti-counterfeiting labels.
For other questions, we will get back to you as soon as possible after receiving your inquiry!
){kind=link}